Shandong Yuejiang Machinery Co., Ltd
Shandong Yuejiang Machinery Co., Ltd
Add to Cart
SS304 goat milking parlor Milking Systems Dairy goat Equipment
Description for milking parlor:
The milking room is the center. Whether the automatic milking hall can operate normally is directly related to the yield and quality of milk. In milking farms, milking machines are the places where milk producing sheep flow most frequently. A sheep twice a day. The milking area of milking hall equipment is the place with the highest density of sheep, with an average area of only 1.6-2 square meters. Such frequent sheep flow and such dense sheep make the temperature and humidity of the milking room much higher than that of the ordinary shed, and the environmental control is more difficult than other sheds. Therefore, in hot summer and cold winter, environmental control measures such as ventilation, cooling and heating must be taken.
Quality:
1,Automatic cleaning tank
2,Rotary vane of vacuum pump is imported from Germany
3,The material of pump and it's rotor are nodular cast iron
Parameter for the milking parlor:
| 2*8 | 2*12 | 2*16 | 2*20 | 2*24 | |
| Working Vacuum | 50Kpa | 50Kpa | 50Kpa | 50Kpa | |
| Pulsation Ratio | 60/40 | 60/40 | 60/40 | 60/40 | |
| Frequency | 60 ± 3 RPM | 60 ± 3 RPM | 60 ± 3 RPM | 60 ± 3 RPM | |
| Vacuum pump power | 5.5 KW | 2*4 KW | 2*4 KW | 2*5.5 KW | |
| Vacuum pump speed | 2100L/min | 2*1200L/min | 2*2100L/min | 2*2100L/min | |
| Milk pump speed | 8T/h | 20T/h | 20T/h | 20T/h | |
| Milk pump power | 2.2KW | 4KW | 4KW | 4KW |
Advantage:
It can recycle the residual milk which is attached to the main pipeline. Thoroughly clean the dirt in the main pipeline especially in hot summer, which can reduce bacterial content and fresh the milk .Save water and electricity.To large extent, it reduced the loaded and unloaded trouble of cleaning the inner dirt in main pipeline.This series are mainly for adult cows to milking. Suitable for large and medium-sized farm or milk collection station to provide advanced centralized milking equipment.
Installation:
1. After the buyer received the milking system, the seller will send two engineers to the buyer’s site to guide installation, adjust the whole system and train labors within 7~10 days.
2. The buyer should bear the cost include actual expenses for the visa, round-trip tickets, insurance, accommodation and labor of engineers.
3. Tools for installation should be provided by the buyer, the seller will provide detailed tool list.
Related products:
Milk cooling tank
Package and shipping:
1. Every order should use a WHOLE container to put goods, as the milking parlor have too many parts.
2. A milk cooling tank is good for you to buy along with the milking parlor together in order to save installation fee for you.
3. After you received all parts for milking parlor, pay attention to put all parts into one room to Product Tags: